Georgetown Well Drilling (512) 555-0148

Well Inspection and Water Testing in Georgetown, TX

Well water samples in test tubes prepared for laboratory analysis

Georgetown Well Drilling inspects wells and tests well water across Georgetown and Williamson County, Texas. A private well has no utility standing behind it. No one checks the water for you and no one warns you when the pump is near the end. The owner is the water department. An inspection and a water test are how you know what you actually have, especially when you are about to buy the property it sits on.

The pre-purchase inspection is the one we get asked for most. A home on a well hides a several thousand dollar system that a standard home inspection barely touches. Before you close, you want to know what the well produces, what shape the pump is in, and whether the water is safe. Those facts are worth having while you still have room to negotiate.

What the Inspection Covers

We measure the standing water level and the pump depth, run a flow test to see what the well sustains under real demand, and check the pressure tank, the switch, and the wiring. We look at the wellhead and its seal, because a poorly sealed head lets surface water and contamination into the well. Then we pull a water sample for a certified lab. When we are done you know the well's output, the pump's condition, and the water's quality, instead of finding all three out the hard way after closing.

Testing the Water Itself

The lab test starts with bacteria, because coliform and E. coli are the signals that surface contamination is reaching the well. In Central Texas limestone we also watch hardness and total dissolved solids, and near farms and septic systems we watch nitrate. We take the sample correctly and read you the numbers straight: what is a harmless nuisance, what is worth treating, and what needs action. A yearly bacteria test after that is cheap insurance on your own drinking water.

Buying a home on a well, or wondering what is in your water? Call (512) 555-0148.

I am buying a home on a well. Should I have it inspected?

Yes, before you close, every time. A well is a several thousand dollar system that most buyers cannot see. An inspection tells you the pump condition, the water level, how much the well produces, and whether the water is safe to drink. A weak well or a failing pump found before closing is a negotiation. Found after closing it is your bill. The inspection costs a small fraction of what a surprise repair does.

What does a well inspection actually check?

We check the things you cannot see from the kitchen tap. The standing water level and the pump depth, the flow rate the well sustains, the pressure tank and switch, the wellhead and its seal against surface water, and the wiring. We run a flow test to see what the well really delivers under load, not just at a trickle. Then we take a water sample for the lab. You get a clear picture of the whole system before money changes hands.

What should well water be tested for?

The baseline test is bacteria, mainly coliform and E. coli, because those signal that surface contamination is reaching the well. Beyond that, hardness and total dissolved solids matter a lot in Central Texas limestone country, and nitrate matters near agriculture and septic systems. We pull the sample properly and send it to a certified lab. Guessing about drinking water is not worth it when a test is this cheap.

How often should I test my well water?

A yearly bacteria test is the standard advice for any household well, and it is worth doing. Test again any time the water changes in taste, smell, or color, after any work on the well, and after a flood or heavy runoff event. A well is a private water supply with no utility watching it for you, so the testing is on the owner. It is a small habit that catches a real problem early.

My water smells or tastes off. Can you find out why?

Yes. A rotten-egg smell often points to sulfur or certain bacteria, a metallic taste to iron or manganese, and a hard, scaly feel to the dissolved limestone that is common here. Some of these are harmless nuisances and some are worth treating. We sample the water, get the lab numbers, and tell you plainly which category yours falls in and whether treatment is warranted, instead of selling you a filter you may not need.

Call now for a free estimate.

(512) 555-0148

Free estimates. Mon-Sat, 8am to 6pm.

☎ Tap to Call: (512) 555-0148